Available tools
26 tools| Tool | Description |
|---|---|
pvt_bubblePoint | Oil bubble-point pressure (Standing 1947). |
pvt_solutionGOR | Solution GOR Rs at pressure (Standing). |
pvt_oilFVF | Saturated oil formation volume factor Bo (Standing). |
pvt_deadOilViscosity | Dead-oil viscosity (Beggs-Robinson). |
pvt_oilViscosity | Live oil viscosity (Beggs-Robinson; undersaturated via Vasquez). |
pvt_gasZ | Gas Z-factor (Dranchuk-Abou-Kassem). |
pvt_gasFVF | Gas formation volume factor Bg. |
pvt_gasViscosity | Gas viscosity (Lee-Gonzalez-Eakin). |
pvt_gasPseudoCriticals | Gas pseudo-criticals Ppc/Tpc (Sutton). |
dca_arpsRate | Arps decline rate q(t): exp/hyperbolic/harmonic. |
dca_arpsCum | Arps cumulative production Np(t). |
dca_arpsEUR | Arps EUR to economic-limit rate. |
dca_arpsFit | Fit Arps qi/Di/b to rate-time data. |
dca_modHypRate | Modified-hyperbolic decline rate (unconventional). |
dca_modHypEUR | Modified-hyperbolic EUR to economic limit. |
dca_duongRate | Duong (2011) shale decline rate. |
pvt_bubble_point_glaso | Bubble-point pressure (Glaso 1980). |
pvt_water_fvf_mccain | Water formation volume factor Bw (McCain 1990). |
mbe_pz | p/z material-balance plotting variable. |
mbe_ogip_from_pz | OGIP from p/z material balance. |
scal_brooksCoreyPc | Brooks-Corey capillary pressure from saturation. |
scal_coreyKrw | Corey water relative permeability. |
frac_dimensionless_conductivity | Dimensionless fracture conductivity Cfd. |
frac_fluid_efficiency | Hydraulic-fracture fluid efficiency. |
sf_chokeCriticalPressure | Critical-flow wellhead pressure upstream of a choke (Gilbert). |
sf_gasDensity | Gas density at flowing pipeline conditions. |
Setup
A few steps to connect your AI agents to Petroleum Calcs.
- 1
Enable Petroleum Calcs
Toggle the connector on at /mcp, it works immediately with no credentials.
Connect to your AI assistant
Pick the tool your team uses for the exact setup steps.
- 1
Open Claude settings
Launch Claude, click the profile button (bottom left), and go to Settings.
- 2
Access connectors
Open the Connectors tab, scroll to the bottom, and click “Add custom connector”.
- 3
Name your connector
Enter any name you’d like for this connector.
- 4
Get the connector URL
Log in to PatchOps, open the /mcp page, and copy the connector URL you want to use.
- 5
Add the connector
Paste the URL into the “Remote MCP server URL” box and click Add.
- 6
Start using
Your Petroleum Calcs connector is ready to use in Claude.